Hyundai Accent: Manual Transaxle System (M6CF1) / Specifications

Hyundai Accent (HC) (2017 - 2022) Service Manual / Manual Transaxle System (M6CF1) / Specifications

- Specifications

Transaxle typeM6CF1
Engine typeGasoline 1.6 MPI
Gear ratio1st3.769
2nd2.045
3rd1.370
4th1.036
5th0.794
6th0.688
Reverse3.700
Final gear ratio4.267

- Tightening Torques
ItemsN.mkgf.mlb-ft
Oil drain plug58.9 - 78.56.0 - 8.043.4 - 57.8
Oil filler plug58.9 - 78.56.0 - 8.043.4 - 57.8
Shift lever assembly bolt8.8 - 13.70.9 - 1.49.4 - 10.1
Control cable retainer11.8 - 14.71.2 - 1.58.7 - 10.8
Back up lamp switch39.2 - 58.84.0 - 6.028.9 - 43.4
Neutral swtich39.2 - 58.84.0 - 6.028.9 - 43.4
Control shaft complete19.6 - 26.52.0 - 2.714.5 - 19.5
Control cable bracket 14.7 - 21.61.5 - 2.210.9 - 15.9
Transaxle bracket mounting bolt88.3 - 107.99.0 - 11.065.1 - 79.8
Transaxle support bracket mounting bolt58.9 - 78.56.0 - 8.043.4 - 57.8
Roll rod bracket bolt49.0 - 63.75.0 - 6.536.2 - 47.0
107.9 - 127.511.0 - 13.079.6 - 94.1
Roll rod support bracket bolt49.0 - 68.6 5.0 - 7.036.2 - 50.6
Start motor mounting bolt49.0 - 63.75.0 - 6.536.2 - 47.0
Transaxle upper mounting bolt (TM=>ENG)42.2 - 53.94.3 - 5.531.1 - 39.8
Transaxle lower mounting bolt (ENG=>TM)42.2 - 48.14.3 - 4.931.1 - 35.4
42.2 - 53.94.3 - 5.531.1 - 39.8

- Lubricants
ItemsRecommnend lubricantQuantity
Transaxle gear oilAPI Service GL-4, SAE 70W
• Recommended oil
–
SHELL : SPIRAX S6 GHME 70W MTF
–
SK : HK SYN MTF 70W
–
GS CALTEX : GS MTF HD 70W
1.5 - 1.6 L
(0.40 -0.42 U.S.gal., 1.58 - 1.69 U.S.qt., 1.32- 1.40 lmp qt.)

- Sealant
ItemsSpecified sealant
Control shaft assemblyLOCTITE 5060

Manual Transaxle System (M6CF1)

Troubleshooting

Other information:

Hyundai Accent (HC) (2017 - 2022) Service Manual: Temperature Control Actuator

- Components Location 1. Temperature control actuator - Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temperature door.

Hyundai Accent (HC) (2017 - 2022) Service Manual: Timing Chain

- Removal 1.Disconnect the battery negative terminal. 2.Turn the crankshaft damper pulley clockwise, and align its groove with the timing mark of the timing chain cover. 3.Remove the timing chain cover.(Refer to Timing System - "Timing Chain Cover") 4.Remove the cam to cam guide (A). 5.Remove the timing chain tensioner (A) and remove the timing chain tensioner arm (B).

Categories

 
Copyright © 2025 hc.hamanual.com