1. Cowl top cover
1.Detach the plug hole (A), loosen the nuts, and then remove the wiper arm (B).
Tightening torque :22.6 - 26.5 N.m (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft)
2.Disconnect the washer nozzle (A).
3.Detach the clips, then remove the cowl top cover (B).
4.To install, reverse the removal procedure.
• Replace any damaged clips (or pin - type retainers).
Hyundai Accent (HC) (2017 - 2022) Service Manual: Description and Operation
- Description Burglar Alarm State [B/A State] B/A StateDescription DISARM1) In "DISARM" state, no vehicle start inhibition. So, when door, hood, or Tailgate is opened, there is no alarm sound and flashing. 2) If the battery is disconnected while the state is not "ARM/ARMWAIT/ALARM/REARM", B/A state is set to "DISARM" state. 3)In "DISARM" state, security indicator keeps blinking.Hyundai Accent (HC) (2017 - 2022) Service Manual: Heater & A/C Control Unit (Manual)
- Components ConnectorPin NOFunctionConnectorPin NOFunction B1Battery (+)B17IGN2 2-18ILL+ (TAIL) 3IGN119- 4-20Sensor ground REF (+5V) 5Intake actuator (Fresh)21HTD (Rear defog indicator) 6Intake actuator (Recirculation)22Hazard signal 7Intake actuator (Feedback)23Rear defog swich 8Evaporator Temperature Sensor (+)24- 9Ambient Temperature Sensor (+)25- 10Blower on signal common26- 11Max blower on signal27 12-28ECV+ 13C_CAN High29ECV- (Ground) 14C_CAN Low30ILL- (RHEO) 15-31Sensor ground 16Ground32Ground - Replacement 1.