Hyundai Accent: Body (Interior and Exterior) / Floor Console

Components and Components Location

- Components [Manual consle]

1. Console front tray mat
2. Floor console upper cover
3. Floor console front bazel assembly
4. Console rear tray mat
5. Parking brake cover
6. Portable ashtray
7. Floor console assembly
8. Shift lever

1. Console front tray mat
2. Floor console upper cover
3. Floor console front bazel assembly
4. Console rear tray mat
5. Parking brake cover
6. Portable ashtray
7. Floor console assembly
8. Shift lever

Floor Console Assembly ➤

Rear Console Cover

- Component Location

1. Rear console cover

• Put on gloves to prevent hand injuries.

• When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

• Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

• Take care not to bend or scratch the trim and panels.

1.Remove the floor console assembly.(Refer to Floor Console - "Floor Console Assembly")

2.Loosen the rear console mounting screws.

3.Using a screwdriver or remover, remove the rear console cover (A).

4.To install, reverse the removal procedure.

• Make sure the connector is connected properly.

• Replace any damaged clips (or pin - type retainers).

Console Armrest

- Component Location

1. Console armrest

• Put on gloves to prevent hand injuries.

• When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

• Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

• Take care not to bend or scratch the trim and panels.

1.Remove the floor console assembly.(Refer to Floor Console - "Floor Console Assembly")

2.Remove the rear console cover.(Refer to Floor Console - "Rear Console Cover")

3.Loosen the mounting screws and remove the console armrest (A).

4.To install, reverse the removal procedure.

• Replace any damaged clips (or pin - type retainers).