Hyundai Accent: Body (Interior and Exterior) / Floor Carpet

Repair procedures

- Replacement

• Put on gloves to prevent hand injuries.

• When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

• Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

• Take care not to bend or scratch the trim and panels.

1.Remove the floor console assembly.(Refer to Floor Console - "Floor Console Assembly")

2.Remove the front seat assembly.(Refer to Front Seat - "Front Seat Assembly")

3.Remove the rear seat cushion assembly.(Refer to Rear Seat - "Rear Seat Assembly")

4.Remove the cowl side trim.(Refer to Interior Trim - "Cowl Side Trim")

5.Remove the center pillar lower trim.(Refer to Interior Trim - "Center Pillar Trim")

6.Remove the floor carpet assembly (A).

7.To install, reverse the removal procedure.

• Replace any damaged clips (or pin - type retainers).

1. Floor carpet assembly