Hyundai Accent: Body (Interior and Exterior) / Front Bumper
Components and Components Location
1. Front bumper assembly
2. Front bumper side bracket [LH]
3. Front bumper side bracket [RH]
Front Bumper Assembly
1. Front bumper assembly
• Put on gloves to prevent hand injuries.
• When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
• Take care not to bend or scratch the trim and panels.
1.Loosen the bolts and clips of the front bumper upper.
2.Loosen the front bumper lower mounting clips.
3.After loosening the pin - type retainers and screws on the side of front bumper (A), detach the side part of front bumper.
• When you pull out the front bumper, the side part of the front bumper could be damaged by the projection.
4.Disconnect the front bumper connector (A).
5.Remove the front bumper assembly (A).
6.To install, reverse the removal procedure.
• Make sure the connector is plugged in properly.
• Replace any damaged clips (or pin - type retainers).
Radiator Grill
1. Radiator grill
• Put on gloves to prevent hand injuries.
• When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
• Take care not to bend or scratch the trim and panels.
1.Remove the front bumper assembly.(Refer to Front Bumper - "Front Bumper Assembly")
2.Remove the front bumper energy absorber (A).
3.Using a screwdriver or remover, remove the radiator grill cover (A).
4.Loosen the radiator grill mounting screws.
5.Using a screwdriver or remover, pull the clip upward and remove the radiator grill (A).
6.To install, reverse the removal procedure.
• Replace any damaged clips (or pin - type retainers).
Other information:
Hyundai Accent (HC) (2017 - 2022) Service Manual: Troubleshooting
- Troubleshooting Limp Home Mode Limp Home Mode features a fail-safe function that prevents dangerous situations in the event of a transmission failure. The vehicle will be driven in limp home mode if the transmission malfunctions. In this mode, the transmission operates at a minimal functionality level (fixed shifting, limited shifting, reverse, neutral), making it possible for the vehicle to reach a service center.Hyundai Accent (HC) (2017 - 2022) Service Manual: Timing Chain
- Removal 1.Disconnect the battery negative terminal. 2.Turn the crankshaft damper pulley clockwise, and align its groove with the timing mark of the timing chain cover. 3.Remove the timing chain cover.(Refer to Timing System - "Timing Chain Cover") 4.Remove the cam to cam guide (A). 5.Remove the timing chain tensioner (A) and remove the timing chain tensioner arm (B).
Contents
Categories
- Manuals Home
- Hyundai Accent Owners Manual
- Hyundai Accent Service Manual
- New on site
- Most important about car
