No | Connector A | Connector B | Connector C | Connector D | Connector |
1 | Battery (+) | Front wiper low backup switch input | Static bending light (Left)_output | - | Dedicated DRL output |
2 | RPAS power_output | Rear washer switch imput | - | Key Interlock switch input | Tail lamp relay output |
3 | Ignition 1 | Rear wiper switch input | B-CAN (High) | - | Power window relay output |
4 | Key IN switch | Front wiper switch input | B-CAN (Low) | - | Front fog lamp relay output |
5 | - | Front wiper intermittent volume input | Auto light power output | - | Rear fog lamp relay output |
6 | Power window lock switch input | Multi function light switch input | Interior lamp autcut ground output | Security ind output | RH Headlamp high output or RH Dedicated DRL otput |
7 | Sunroof open switch input | PAS_LIN input | Room lamp output | Key solenoid output | LH Headlamp high output or LH Dedicated DRL otput |
8 | Rear right door unlock switch input | - | Turnsignal lamp (Rear Right) output | Head lamp low relay output | Haedlamp high power1 input or Dedicated DRL power1 input |
9 | Assist door unlock switch input | - | Turnsignal lamp (Rear Left) output | Rear wiper relay output | Haedlamp high power2 input or Dedicated DRL power2 input |
10 | Driver Key unlock switch input | - | Turnsignal lamp (Front Left) output | Navi wake up output | - |
11 | Wiper washer switch input | Static bending light input | Tailgate release switch input | Wiper parking state input | Drive door unlock relay output |
12 | PAS Power input | Crash signal input | Door open switch (Assist) input | - | Door unlock relay output |
13 | - | - | Door open switch (Rear Right) input | AV Tail output | Door lock relay output |
14 | ACC | Head lamp high switch input | Door open switch (Driver) input | Start inhibit relay output | - |
15 | Ignition 2 | Fog lamp switch input | Door open switch (Rear Left) input | - | Trunk unlock relay output or Tailgate unlock relay output |
16 | - | Turn signal lamp switch input | Auto light sensor input | - | - |
17 | Hazard switch | Head lamp low backup switch input | Auto light ground output | - | Front wiper high relay output |
18 | Power window unlock switch input | - | - | Head lamp high relay output | Front wiper low relay output |
19 | Rear left door unlock switch input | Tail gate open switch input | Turnsignal lamp power input | Alarm horn relay output | Safety power window enable output |
20 | Driver Key lock switch | - | Front right turnsignal lamp output | - | - |
21 | Driver Key lock switch | Multi function switch ground | |||
22 | Ground power | Static bending light (Right)_output |
Hyundai Accent (HC) (2017 - 2022) Service Manual: Cylinder Head
- Removal • Use Fender cover to avoid damaging painted surfaces. • To avoid damaging the cylinder head, wait until the engine coolant temperature drops below normal temperature before removing it. • When handling a metal gasket, take care not to fold the gasket or damage the contact surface of the gasket. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion.- Inspection 1.Troubleshooting for Speaker(1)Basic inspection of speakerInspect the sound from speaker after verifying that the speaker mounting screws is removed and the wiring connector is connected precisely to remove vibration transmitted from body trims and surrounding parts. (2)Case TroubleshootingNoCaseInspection/Remedy 1Trembling sound1)Before replacing the speaker, inspect that the mounting screw is installed normally.