Contents:
1. Outside rear view mirror
• Put on gloves to prevent hand injuries.
• When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Take care not to scratch the body surface.
1.Using a screwdriver or remover, remove the front door quadrant inner cover (A).
2.Disconnect the tweeter speaker connector (A).
3.Using a screwdriver or remover, remove the outside rear view mirror cover (A).
4.Disconnect the outside rear view mirror connector (A).
5.After loosening the mounting bolts, remove the outside rear view mirror (A).
Tightening torque :6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)
6.To install, reverse the removal procedure.
• Make sure the connector is connected properly.
• Replace any damaged clips (or pin - type retainers).
1. Inside rear view mirror
• Put on gloves to prevent hand injuries.
1.Loosen the inside rear view mirror mounting screw.
2.Push the inside rear view mirror base (B) up to remove the inside rear view mirror assembly (A).
3.To install, reverse the removal procedure.
• Put on gloves to prevent hand injuries.
1.Remove the ECM mirror cover (A).
2.Disconnect the ECM mirror connector (A).
3.Loosen the mounted screws and push the ECM mirror base upward to remove the ECM mirror assembly (A).
4.To install, reverse removal procedure.
• Make sure the connector is connected properly.
• Be careful not to damage the windshield glass.
Hyundai Accent (HC) (2017 - 2022) Service Manual: Specifications
- Specifications Ignition System Ignition Coil ItemSpecification Rated Voltage (V)13.5 Operation Voltage (V)6 - 16 ItemSpecification Engine Speed (RPM)100020003000400050006000 Dwell Time (ms)3.43.43.42.92.72.5 Secondary Coil Voltage (kV)40 ↑40 ↑40 ↑40 ↑40 ↑38 ↑ Spark plug ItemSpecification TypeSILZKR7E9 Gap0.8 - 0.9 mm (0.Hyundai Accent (HC) (2017 - 2022) Service Manual: Spark Plug
- Specification ItemSpecification TypeSILZKR7E9 Gap0.8 - 0.9 mm (0.0354 - 0.0394 in.) Electrode MaterialNickel Alloy - Description A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture therein by means of an electric spark, while containing combustion pressure within the engine.