Hyundai Accent: Steering wheel / Heated Steering wheel

Hyundai Accent (HC) (2017 - 2022) Service Manual / Steering System / Steering wheel / Heated Steering wheel

- Components

Heated steering wheel switch

1. Heated steering wheel switch

Heated steering wheel control unit

1. Heated steering wheel control unit

Heated steering wheel pad

1. Heated steering wheel control pad

- Description

• For the convenience of drivers during the winter, exothermic paint is applied to the surface of the steering wheel to generate heat when it is gripped.

- Specifications

Item	Specification
Voltage	13.5 V
Heated pad resistance	1.7 ± 0.2 Ω (22°C)
NTC resistance	4.3 kΩ ± 10% (22°C)

- Circuit Diagram

Heated steering wheel control unit

Heated steering wheel pad

Heated steering wheel switch

- Terminal Function

Heated steering wheel control unit

Heated steering wheel pad

Housing	Pin	Function	Wire color
Pad	1	HEATER	YELLOW
	2	NTC+	RED/BLACK
	3	Ground (Heater)	BLACK
	3	Ground (NTC-)	BLACK

Heated steering wheel switch

Pin	Function
10	Steering wheel heat signal
11	Steering wheel heat IND
16	Ground

- Removal

Heated steering wheel switch

1.Disconnect the negative (-) batttery terminal.

2.Remove the floor console assembly.(Refer to Body - "Floor Console Assembly")

3.Remove the heated steering wheel switch (A) after loosening the screws.

4.To install, reverse the removal procedure.

Heated steering wheel control unit

1.Remove the steering wheel.(Refer to Steering System - "Steering Wheel")

2.Loosen the screw and then remove the lower cover.

3.Disconnect the remote control switch connector.

4.Remove the control box by loosening the screw.

5.To install, reverse the removal procedure.

Other information:

Hyundai Accent (HC) (2017 - 2022) Service Manual: Fuel Pressure Test

- Fuel Pressure Test 1.Release the residual pressure in fuel line.(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line") • When removing the fuel pump fuse, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of "Release Residual Pressure in Fuel Line" work. 2.Install the Special Service Tool (SST).

Hyundai Accent (HC) (2017 - 2022) Service Manual: Specifications

- Specifications Transaxle typeM6CF1 Engine typeGasoline 1.6 MPI Gear ratio1st3.769 2nd2.045 3rd1.370 4th1.036 5th0.794 6th0.688 Reverse3.700 Final gear ratio4.267 - Tightening Torques ItemsN.mkgf.mlb-ft Oil drain plug58.9 - 78.56.0 - 8.043.4 - 57.8 Oil filler plug58.9 - 78.56.0 - 8.043.4 - 57.8 Shift lever assembly bolt8.8 - 13.

Hyundai Accent: Steering wheel / Heated Steering wheel

Steering wheel

Motor Driven Power Steering

Other information:

Categories