1.Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.
2.Check for continuity between the terminals.
3.If continuity is not specified, replace the switch.
1.Disconnect the negative (-) battery terminal.
2.Remove the crash pad lower panel.(Refer to Body - "Crash Pad Lower Panel")
3.Remove the steering column upper and lower shrouds.(Refer to Body - "Steering Column Shroud Panel")
4.Disconnect the key warning/immobilizer connector (A).
5.Insert key and turn it to ACC position.
6.Pushing lock pin (A) with the awl.
7.Remove the immobilizer coil antenna (A) after loosening the mounting screw.
1.Install the key lock cylinder.
2.Install the key warning and immobilizer connector.
3.Install the ignition switch.
4.Install the steering column shrouds and crash pad lower panel.
Hyundai Accent (HC) (2017 - 2022) Service Manual: Specifications
- Specifications ItemsBulb TypeBulb Wattage (W) FrontHead lampGeneral (Low/High)H455 / 60 Option (Low/High) Bi-function9005 HL+60 Turn signal lamp PY21W21 Position lamp W5W5 Fog lamp H835 Static bending light (SBL) H755 Type B (Daytime Running Lamp - DRL) LEDLED RearRear combination lmap(General)Turn signal lampPY21W21 Stop / Tail lampP21/ 5W21/ 5 Tail lamp W5W5 Back up lampW16W16 Rear combination lmap(Option)Inside Tail/stop lampLEDLED Out side Tail/stop lampLEDLED Turn signal lHyundai Accent (HC) (2017 - 2022) Service Manual: TPMS Receiver
- Description 1.FunctionThe TPMS monitors the pressure and temperature of the tires and warns the driver of changes that could potentially influence driving conditions.The cluster warning lamp displays the messages generated from processing the data. The ECU processes the data received from the WE sensor, determines the conditions of the tire, and then sends any necessary warning signals to the driver through the CAN line or hard wire control line.