1. Outside rear view mirror
• Put on gloves to prevent hand injuries.
• When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
• Take care not to scratch the body surface.
1.Using a screwdriver or remover, remove the front door quadrant inner cover (A).
2.Disconnect the tweeter speaker connector (A).
3.Using a screwdriver or remover, remove the outside rear view mirror cover (A).
4.Disconnect the outside rear view mirror connector (A).
5.After loosening the mounting bolts, remove the outside rear view mirror (A).
Tightening torque :6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)
6.To install, reverse the removal procedure.
• Make sure the connector is connected properly.
• Replace any damaged clips (or pin - type retainers).
Hyundai Accent (HC) (2017 - 2022) Service Manual: Description and Operation
- OBD-II Review 1. Overview The California Air Resources Board (CARB) began regulation of On Board Diagnostics (OBD) for vehicles sold in California beginning with the 1988 model year. The first phase, OBD-I, required monitoring of the fuel metering system, Exhaust Gas Recirculation (EGR) system and additional emission related components.Hyundai Accent (HC) (2017 - 2022) Service Manual: Alternator
- Specification ItemSpecification Rated voltage13.5V, 130A Speed in use 1,000 - 18,000 rpm Voltage regulatorIC Regulator built-in type Regulator Setting VoltageExternal mode 10.6 - 16 ± 0.3V Internal mode14.5 ± 0.3V Temperature GradientExternal mode0 ± 2 mV / °C Internal mode-3.5 ± 2 mV / °C - Description The Alternator has eight built-in diodes, each rectifying AC current to DC current.