Hyundai Accent: Blower / PWM Blower Module
Hyundai Accent (HC) (2017 - 2022) Service Manual / Heating, Ventilation and Air Conditioning / Blower / PWM Blower Module
1.Turn the ignition switch ON.
2.Manually operate the control switch and measure the voltage of the blower motor.
3.Select the control switch to raise voltage until the speed gets high.
| Blower Speed | Manual Voltage (V) |
| 1 | 4 |
| 2 | 5.5 |
| 3 | 6.9 |
| 4 | 8.4 |
| 5 | 9.8 |
| 6 | 11.3 |
| 7 | B(+) |
| Blower Speed | Voltage (V) | ||
| Manual Voltage (V) | Auto Voltage (V) | ||
| A/C ON | A/C OFF | ||
| 1 | 3.8 | 3.4 | Auto Low(4.6V) |
| 2 | 4.6 | 4.6 | 4.6 - 5.6 |
| 3 | 5.9 | 5.9 | 5.6 - 6.7 |
| 4 | 7.2 | 7.2 | 6.7 - 7.7 |
| 5 | 8.3 | 8.3 | 7.7 - 8.9 |
| 6 | 9.5 | 9.5 | 8.9 - 10.1 |
| 7 | 11.3 | 11.3 | 10.1 - AUTO HI (10.8V) |
| 8 | B(+) | B(+) | |
1.Disconnect the negative (-) battery terminal.
2.Disconnect the connector (A) and then remove the PWM Blower module (B) after loosening the mounting screws.
3.Install in the reverse order or removal.
Other information:
Hyundai Accent (HC) (2017 - 2022) Service Manual: Injector
- Description A DPI (Dual Point Injection) system means a system with two injectors in one cylinder (intake port) and has a total of eight injectors.The injector is an electronically controlled fuel injector, a solenoid valve that supplies precisely calculated fuel to the engine in spray form for the optimal combustion. This helps satisfy various engine operating conditions.Hyundai Accent (HC) (2017 - 2022) Service Manual: Specifications
- Specifications Ignition System Ignition Coil ItemSpecification Rated Voltage (V)13.5 Operation Voltage (V)6 - 16 ItemSpecification Engine Speed (RPM)100020003000400050006000 Dwell Time (ms)3.43.43.42.92.72.5 Secondary Coil Voltage (kV)40 ↑40 ↑40 ↑40 ↑40 ↑38 ↑ Spark plug ItemSpecification TypeSILZKR7E9 Gap0.8 - 0.9 mm (0.
Categories
- Manuals Home
- Hyundai Accent Owners Manual
- Hyundai Accent Service Manual
- New on site
- Most important about car
Copyright © 2025 hc.hamanual.com