Hyundai Accent: Body (Interior and Exterior) / Rear Seat Belt

Components and Components Location

- Components

1. Rear seat belt buckle [LH]
2. Rear seat belt buckle [RH]
3. Rear center seat belt buckle
4. Rear seat belt retractor [LH]
5. Rear seat belt retractor [RH]
6. Rear center seat belt retractor

Rear Seat Belt Retractor

- Component Location

1. Rear seat belt retractor [LH]
2. Rear seat belt retractor [RH]

• When installing the belt, make sure not to damage the retractor.

1.Remove the package tray trim.(Refer to Interior Trim - "Package Tray Trim")

2.After loosening the mounting bolt, remove the rear seat belt lower anchor (A).

Tightening torque :39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.8 - 39.8 lb-ft)

3.Loosen the retractor (A) mounting bolt, remove the rear seat belt (B).[LH]

Tightening torque :39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.8 - 39.8 lb-ft)

Tightening torque :39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.8 - 39.8 lb-ft)

4.To install, reverse the removal procedure.

• Replace any damaged clips (or pin - type retainers).

Rear Center Seat Belt Retractor

- Component Location

1. Rear center seat belt retractor

• When installing the belt, make sure not to damage the retractor.

1.Remove the package tray trim.(Refer to Interior Trim - "Rear Package Tray Trim")

2.After loosening the mounting bolts, remove the rear center seat belt retractor (A).

Tightening torque :39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.8 - 39.8 lb-ft)

3.To install, reverse the removal procedure.

• Replace any damaged clips.

Rear Seat Belt Buckle

- Component Location

1. Rear seat belt buckle [RH]
2. Rear seat belt buckle [Center]
3. Rear center seat belt buckle [LH]

1.Remove the rear seat cushion assembly.(Refer to Rear Seat - "Rear Seat Cushion Assembly")

2.Loosen the mounting bolt, remove the rear seat belt buckle (A).[LH]

Tightening torque :39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)

Tightening torque :39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)

3.To install, reverse the removal procedure.

• The buckle and tongue of different types are impossible to be latched, so check that the buckle & tongue have the same types.

• Distinguish the rear side seat buckle from the center seat buckle before latching.

• If foreign materials are stuck in the inside button of buckle, it may cause interference during the latching process, leading to a functional problem (for example - beverages (viscous drinks), toothpicks, sand, plastic, vinyl, metal pieces, etc.)

• After latching the buckle and tongue, check the fastening force using a Push - Pull Gauge (fastening force: 3kgf or less).