Hyundai Accent: Body Electrical System / Sun Roof
Components and Components Location
1. Sunroof switch
2. Sunroof motor & controller
3. Sunroof
Schematic Diagrams
Sunroof Switch
1.Disconnect the negative (-) battery terminal.
2.Open the sunglass case cover from the overhead console and remove the 2 screws holding the overhead console. Disconnect the switch connector and Map lamp connector, and then remove the overhead console lamp (A).
3.Check for continuity between the terminals.
Sunroof Motor ➤
Other information:
Hyundai Accent (HC) (2017 - 2022) Service Manual: SRS Control Module (SRSCM)
- Description • Supplemental Restraint System Control Module (SRSCM) determines whether and when to deploy air bag module, seat belt pretensioner (BPT). • It supplies the air bag module with the power required to deploy the module or the BPT. • It also performs self-diagnosis function of the supplemental restraint system. - Components 1.Hyundai Accent (HC) (2017 - 2022) Service Manual: Fuel Tank Pressure Sensor (FTPS)
- Description Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission control system and is installed on the fuel tank, the fuel pump, or the canister. It checks the purge control solenoid valve operation and detects a leakage of the system. - Specification Pressure[kPa (kgf/cm², in H2O)]Output Voltage (V) -6.67 (-0.
Contents
Categories
- Manuals Home
- Hyundai Accent Owners Manual
- Hyundai Accent Service Manual
- New on site
- Most important about car
Copyright © 2025 hc.hamanual.com