Tool(Number and Name) | Illustration | Use |
09495-3K000 Band installer |
| Installation of ear type boot band |
09568-1S100 Ball joint puller |
| Saperate the ball joint from the front axle |
09495-33000 Puller |
| Removal of spider assembly from a drive shaft |
Trouble Symptom | Probable cause | Remedy |
Vehicle pulls to one side | Scoring of driveshaft ball joint | Replace |
Wear, rattle or scoring of wheel bearing | Replace | |
Defective front suspension and steering | Adjustment or Replace | |
Vibartion | Wear, damage or bending of driveshaft | Replace |
Driveshaft rattle and hub serration | Replace | |
Wear, rattle or scratching of wheel bearing | Replace | |
Shimmy | Defective wheel balance | Adjustment or Replace |
Defective front suspension and steering | Adjustment or Replace | |
Excessive noise | Wear, damage or bending of driveshaft | Replace |
Rattle of driveshaft and worn hub splines | Replace | |
Wear, rattle or scoring of wheel bearing | Replace | |
Loose hub nut | Adjustment or Replace | |
Defective front suspension and steering | Adjustment or Replace |
Hyundai Accent (HC) (2017 - 2022) Service Manual: Specifications
- Specifications ItemSpecification Clutch operation methodHydraulic type Clutch cover assemblyTypeDiaphragm spring strap Clutch discTypeSingle dry with diaphragm Facing diameter(Outer × inner)Ø210 ± 1 × Ø145 ± 1(Ø8.2677 ± 0.0394 × Ø5.7087 ± 0.0394) - Service Standard ItemSpecification Clutch disc thickness [When free]8.3 ± 0.Hyundai Accent (HC) (2017 - 2022) Service Manual: Position Switch
- Specifications ItemSpecification Power supply (V)4.5 - 5.5V Output typePWM (S1, S2), ON/OFF (Ps, Ns) - Component Location 1. Position switch2. Manual control lever - Circuit Diagram - Inspection • Inspect the connector thoroughly for looseness, poor connection, bending, corrosion, contamination, deformation, or damage.