Wire No | Designation | Current | |
max | min | ||
13 | Ground for recirculation pump | 39A | 10A |
1 | Voltage supply for pump motor | 39A | 10A |
25 | Voltage supply for solenoid valves | 15A | 2A |
38 | Ground for solenoid valves and ECU | 15A | 2A |
22 | Signal wheel speed sensor FL | 16.8 mA | 5.9 mA |
33 | Voltage supply for the active wheel speed sensor RL | 16.8 mA | 5.9 mA |
19 | Voltage supply for the active wheel speed sensor RR | 16.8 mA | 5.9 mA |
18 | Voltage supply for the active wheel speed sensor FR | 16.8 mA | 5.9 mA |
6 | Signal wheel speed sensor FR | 16.8 mA | 5.9 mA |
14 | CAN LOW | 30 mA | 20 mA |
34 | Voltage supply for the active wheel speed sensor FL | 16.8 mA | 5.9 mA |
20 | Signal wheel speed sensor RL | 16.8 mA | 5.9 mA |
32 | Voltage for HECU | 1A | 500 mA |
31 | Signal wheel speed sensor RR | 16.8 mA | 5.9 mA |
30 | Brake light switch | 10 mA | 5 mA |
26 | CAN HIGH | 30 mA | 20 mA |
27 | Wheel speed sensor output | Open Draim |
Hyundai Accent (HC) (2017 - 2022) Service Manual: Control Shaft Complete
- Components 1. Control shaft complete - Removal 1.Set shift lever to N position. 2.Turn OFF ignition switch and disconnect the negative (-) battery cable. 3.Remove the air cleaner assembly and air duct.(Refer to Engine Mechanical System - "Air Cleaner") 4.Remove the battery and battery tray.(Refer to Engine Electrical System - "Battery") 5.Hyundai Accent (HC) (2017 - 2022) Service Manual: Troubleshooting
- Trouble Symptom Charts Trouble Symptom 1 Trouble Symptom 2 Trouble symptomProbable causeRemedy The set vehicle speed varies greatly upward or downward"Surging" (repeated alternating acceleration and deceleration) occurs after settingMalfunction of the vehicle speed sensor circuitRepair the vehicle speed sensor system, or replace the part Malfunction of ECMCheck input and output signals at ECM Trouble Symptom 3 Trouble symptomProbable causeRemedy The CC system is not canceled whe