Hyundai Accent: Smart Key System / Smart Key Diagnostic

Hyundai Accent (HC) (2017 - 2022) Service Manual / Body Electrical System / Smart Key System / Smart Key Diagnostic

- Inspection Self Diagnosis With Scan Tool It will be able to diagnose defects of SMART KEY system with Diagnostic tool quickly. Diagnostic tool can operates actuator forcefully, input/output value monitoring and self diagnosis.The following three features will be major problem in SMART KEY system.

1.Problem in SMART KEY unit input.

2.Problem in SMART KEY unit.

3.Problem in SMART KEY unit output.

So the following three diagnosis operates will be the major problem solution process.

1.SMART KEY unit Input problem : switch diagnosis

2.SMART KEY unit problem : communication diagnosis

3.SMART KEY unit Output problem : antenna and switch output diagnosis

Switch Diagnosis

1.In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (Diagnostic tool).The diagnostic system(Diagnostic tool) provides the following information.

(1)Fault Code Searching : Checking failure and code number (DTC)

(2)Data Analysis : Checking the system input/output data state

(3)Actuation test : Checking the system operation condition

(4)S/W Management : Controlling other features including system option setting and zero point adjustment

2.If diagnose the vehicle by Diagnostic tool, select "DTC Analysis" and "Vehicle".

3.If check current status, select the "Data Analysis" and "Car model".

4.Select the SMK' to be checked in order to check the vehicle with the tester.

5.You can see the situation of each switch on scanner after connecting the "current data" process.

Display	Description
FL Toggle SW	ON : Push button is ON in the driver door handle.
FR Toggle SW	ON : Push button is ON in the assist door handle.
Tailgate open SW	ON : Tailgate button is ON.
Gear P Position	ON : Shift lever is P position.
IGN 1	ON : IGN switch is IG position.
ACC	ON : IGN switch is ACC position.
Brake SW	ON : Brake switch is ON.

Fault Code Searching

1.Fault code searching that the each linked components operates normal.

2.Connect the cable of Diagnostic tool to the data link connector in driver side crash pad lower panel.

3.Select the 'Fault Code Searching' and 'Car model'.

Antenna Actuation Diagnosis

1.Connect the cable of Diagnostic tool to the data link connector in driver side crash pad lower panel.

2.Select the 'Actuation Test' and 'Car model'.

3.Set the smart key near the related antenna and operate it with a Diagnostic tool.

4.Set the smart key near the related antenna and operate it with a Diagnostic tool.

5.If the LED of smart key is blinking, the smart key is normal.

6.If the LED of smart key is not blinking, check the voltage of smart key battery.

7.Antenna actuation

– Interior Antenna 1

– Interior Antenna 2

– Bumper Antenna

– Driver Door Antenna

– Assist Door Antenna

Antenna Status Check

1.Connect the cable of Diagnostic tool to the data link connector in driver side crash pad lower panel.

2.Select the 'S/W Management' and 'Car model'.

3.Select the 'Smart Key Unit' and 'Antenna Status Check'.

4.Set the smart key near the related antenna and operate it with a Diagnostic tool.

5.If the smart key runs normal , the related antenna, smart key (transmission, reception) and exterior receiver are normal.

6.Antenna status

– Interior Antenna 1

– Interior Antenna 2

– Bumper Antenna

– Driver Door Antenna

– Assist Door Antenna

FOB Status Check

1.Connect the cable of Diagnostic tool to the data link connector in driver side crash pad lower panel.

2.Select the 'S/W Management' and 'Car model'.

3.Select the 'Smart Key Unit' and 'FOB KEY STATUS IMFORMATION'.

Smart Key Status Check

1.Connect the cable of Diagnostic tool to the data link connector in driver side crash pad lower panel.

2.Select the 'S/W Management' and 'Car model'.

3.Select the 'Smart Key Unit' and 'SMK STATUS INFORMATION'.

Neutralization Status Check

1.Connect the cable of Diagnostic tool to the data link connector in driver side crash pad lower panel.

2.Select the 'S/W Management' and 'Car model'.

3.Select the 'Smart Key Unit' and 'Neutralization Mode'.

Smart Key Unit

Keyless Entry And Burglar Alarm

Other information:

Hyundai Accent (HC) (2017 - 2022) Service Manual: Troubleshooting

- Troubleshooting Problem Symptoms Table Use the table below to help you find the cause of the problem. The numbers indicate the priority of the like cause of the problem. Check each part in order.If necessary, replace these parts.SymptomSuspect AreaReference Lower pedal or spongy pedal1. Brake system (Fluid leaks)2. Brake system (Air in)3. Piston seals (Worn or damaged)4.

Hyundai Accent (HC) (2017 - 2022) Service Manual: Specifications

- Specifications ItemsBulb TypeBulb Wattage (W) FrontHead lampGeneral (Low/High)H455 / 60 Option (Low/High) Bi-function9005 HL+60 Turn signal lamp PY21W21 Position lamp W5W5 Fog lamp H835 Static bending light (SBL) H755 Type B (Daytime Running Lamp - DRL) LEDLED RearRear combination lmap(General)Turn signal lampPY21W21 Stop / Tail lampP21/ 5W21/ 5 Tail lamp W5W5 Back up lampW16W16 Rear combination lmap(Option)Inside Tail/stop lampLEDLED Out side Tail/stop lampLEDLED Turn signal l

Hyundai Accent: Smart Key System / Smart Key Diagnostic

Smart Key Unit

Keyless Entry And Burglar Alarm

Other information:

Categories