Hyundai Accent: Body Electrical System / Smart Key System
Hyundai Accent (HC) (2017 - 2022) Service Manual / Body Electrical System / Smart Key System
Specifications ➤
Components and Components Location
1. Smart key unit
2. Interior antenna 1
3. Interior antenna 2
4. Interior antenna 3
5. Buzzer
6. Electronic steering column lock (ESCL)
7. Door outside handle antenna
8. Bumper antenna
Description and Operation ➤
Smart Key
1.Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS.
2.Select the 'S/W Management' and 'Car model'.
3.Select the 'Smart Key Unit' and 'Smart Key Code Saving'.
4.Follow the instructions on the screen.
Smart Key Unit ➤
Smart Key Diagnostic ➤
Other information:
Hyundai Accent (HC) (2017 - 2022) Service Manual: Cylinder Block
- Disassembly • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion. • Mark all wiring connector and hoses to avoid misconnection. • To release the fuel system pressure before removing the engine assembly, start the engine without fuel pump relay.Hyundai Accent (HC) (2017 - 2022) Service Manual: Electric EGR Control Valve
- Description The Electric EGR Control Valve is installed in between the EGR cooler and the exhaust line and is a solenoid valve. This valve controls EGR (Exhaust Gas Recirculation) amount by the ECM's duty control signal depending on engine load and the need of intake air.The Exhaust Gas Recirculation (EGR) system is used to add the exhaust gas to intake air in order to reduce an excess of air and the temperature in the combustion chamber.
Contents
- Specifications
- Components and Components Location
- Description and Operation
- Smart Key
- Smart Key Unit
- Smart Key Diagnostic
Categories
- Manuals Home
- Hyundai Accent Owners Manual
- Hyundai Accent Service Manual
- New on site
- Most important about car
Copyright © 2025 hc.hamanual.com