Hyundai Accent: Suspension System / Specifications
- Specifications
Front Suspension
| Item | Specification |
| Suspension type | Mac Pherson Strut |
| Shock absorber | Type | General Valve |
Rear Suspension
| Item | Specification |
| Suspension type | Couple Torsion Beam Axle |
| Shock absorber | Type | General Valve |
Wheel & Tire
| Item | Specification |
| Wheel | Aluminum | 5.5J * 15 |
| 6.5J * 17 |
| Steel | 5.5J * 15 |
| Tire | 185/65 R15 |
| 205/45 R17 |
| Spare tire | T125/80 R15 |
| Tire pressure kg/cm² (psi) | 185/65 R15 | 230 (33) |
| 205/45 R17 | 230 (33 ) |
| T125/80 R15 | 420 (60) |
Wheel Alignment
| Item | Specification |
| Front | Toe-in | Total | 0.15° ± 0.2° |
| Individual | 0.075° ± 0.1° |
| Camber angle | -0.5 ± 0.5° |
| Caster angle | 4.64° ± 0.5° |
| King-pin angle | 13.23° ± 0.5° |
| Ride Height | 367 ± 10 mm (14.4488 ± 0.3937 in) |
| Rear | Toe-in | Total | 0.3° ± 0.3° |
| Individual | 0.15° ± 0.15° |
| Camber angle | -1.5° ± 0.5° |
Ride Height
(Full fuel condition) | 368 ± 10 mm (14.4881 ± 0.3937 in) |
- Tightening Torques
Front Suspension
| Item | Tightening torque (kgf.m) |
| N.m | kgf.m | lb-ft |
| Hub nuts | 107.9 - 127.5 | 11.0 - 13.0 | 79.6 - 94.0 |
| Front strut assembly to front axle | 98.1 - 117. | 10.0 - 12.0 | 72.3 - 86. |
| Front strut assembly to body | 49.0 - 58.8 | 5.0 - 6.0 | 36.2 - 43.4 |
| Lower arm to sub frame (Front) | 117.7 - 137.3 | 12.0 - 14.0 | 86.8 - 101.3 |
| Lower arm to sub frame (Rear) | 156.9 - 176.5 | 16.0 - 18.0 | 115.7 - 130.2 |
| Lower arm to knuckle | 58.8 - 70.6 | 6.0 - 7.2 | 43.4 - 52.1 |
| Tie rod end castle nut | 23.5 - 33.4 | 2.4 - 3.4 | 17.4 - 24.5 |
| Steering gear box to sub frame | 88.3 - 107.9 | 9.0 - 11.0 | 65.1 - 79.6 |
| Stabilizer bar to stabilizer link | 98.1 - 117.7 | 10.0 - 12.0 | 72.3 - 86.8 |
| Stabilizer bar to sub frame | 44.1 - 53.9 | 4.5 - 5.5 | 32.5 - 39.8 |
| Stabilizer bar to front strut assembly | 98.1 - 117.7 | 10.0 - 12.0 | 72.3 - 86.8 |
| Sub frame mounting to body bolt & nut | 176.5 - 196.1 | 18.0 - 20.0 | 130.2 - 144.7 |
| Bolt connecting universal joint to pinion (M8 BOLT) | 32.4 - 37.3 | 3.3 - 3.8 | 23.9 - 27.5 |
| Bolt connecting universal joint to pinion (M10 BOLT) | 49.0 - 58.8 | 5.0 - 6.0 | 36.2 - 43.4 |
| Roll rod bracket to roll rod support bracket fixing bolt & nut | 107.9 - 127.5 | 11.0 - 13.0 | 79.6 - 94.0 |
Rear Suspension
| Item | Tightening torque (kgf.m) |
| N.m | kgf.m | lb-ft |
| Hub nuts | 107.9 - 127.5 | 11.0 - 13.0 | 79.6 - 94.0 |
| Shock absorber to body | 49.0 - 63.7 | 5.0 - 6.5 | 36.2 - 47.0 |
| Shock absorber to torsion beam axle | 98.1 - 117.7 | 10.0 - 12.0 | 72.3 - 86.8 |
| Torsion beam axle to body | 117.7 - 137.3 | 12.0 - 14.0 | 86.8 - 101.3 |
| Bitmap Torsion beam axle to brake caliper | 63.7 - 73.5 | 6.5 - 7.5 | 47.0 - 54.2 |
| Shock absorber lock nut | 19.6- 24.5 | 2.0 - 2.5 | 14.5 - 18.1 |
Other information:
Hyundai Accent (HC) (2017 - 2022) Service Manual: Specifications
- Specifications
ItemsBulb TypeBulb Wattage (W)
FrontHead lampGeneral (Low/High)H455 / 60
Option (Low/High) Bi-function9005 HL+60
Turn signal lamp PY21W21
Position lamp W5W5
Fog lamp H835
Static bending light (SBL) H755
Type B (Daytime Running Lamp - DRL) LEDLED
RearRear combination lmap(General)Turn signal lampPY21W21
Stop / Tail lampP21/ 5W21/ 5
Tail lamp W5W5
Back up lampW16W16
Rear combination lmap(Option)Inside Tail/stop lampLEDLED
Out side Tail/stop lampLEDLED
Turn signal l
Hyundai Accent (HC) (2017 - 2022) Service Manual: Floor Console Assembly
- Replacement
[Manual consle]
• Put on gloves to prevent hand injuries.
• When removing with a flat - tip screwdriver or remover, wrap
protective tape around the tools to prevent damage to components.
• Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Categories
