Hyundai Accent: Suspension System
Hyundai Accent (HC) (2017 - 2022) Service Manual / Suspension System
Specifications ➤
Special Service Tools
| Tool (Number and Name) | Illustration | Use |
| 09568-1S100 |
| Saperate the ball joint from the front alxe |
| 09546-3X100 Shock absorber lock nut removal tool |
| Used for remove the shock absorber lock nut. |
| 09551-AL100 Rear torsion beam axle bush removal / installation tool |
| Rear torsion beam axle bush removal and installation tool |
| 09545-AL100 Front lower arm G bushing replacement tool |
| Used for replacement of the front lower arm G bushing |
Troubleshooting ➤
Front Suspension System ➤
Rear Suspension System ➤
Tires/Wheels ➤
Tire Pressure Monitoring System ➤
Other information:
Hyundai Accent (HC) (2017 - 2022) Service Manual: Repair procedures
- Removal 1.Remove the air cleaner assembly.(Refer to Engine Mechanical System - "Air cleaner") 2.Remove the battery and battery tray.(Refer to Body Electrical System - "Battery") 3.Drain the coolant.(Refer to Engine Mechanical System - "Coolant") 4.Disconnect the position switch connector (A). 5.Disconnect the driven pully speed sensor connector (B).Hyundai Accent (HC) (2017 - 2022) Service Manual: Rear Disc Brake
- Components 1. Return spring2. Operating lever3. Stopper4. Guide rod pin5. Guide rod boot6. Caliper carrier7. Pad retainer8. Brake pad9. Pad return spring10.Caliper body - Removal 1.Loosen the wheel nuts slightly.Raise the vehicle, and make sure it is securely supported. 2.Remove the rear wheel and tire (A) from front hub.Tightening torque :107.
Contents
- Specifications
- Special Service Tools
- Troubleshooting
- Front Suspension System
- Rear Suspension System
- Tires/Wheels
- Tire Pressure Monitoring System
Categories
- Manuals Home
- Hyundai Accent Owners Manual
- Hyundai Accent Service Manual
- New on site
- Most important about car
Copyright © 2025 hc.hamanual.com