Drive Pulley Speed Sensor
Item | Specification |
Type | Hall sensor |
Output voltage (V) | High : 1.18 - 1.68 (Nor : 1.4) |
Low : 0.59 - 0.84 (Nor : 0.7) |
Turbine Speed Sensor
Item | Specification |
Type | Hall sensor |
Output voltage (V) | High : 1.18 - 1.68 (Nor : 1.4) |
Low : 0.59 - 0.84 (Nor : 0.7) |
Oil Temperature Sensor
Item | Specification |
Type | *NTC thermistor |
Temp.[(˚C)˚F] / Resistance (kΩ) | (-40)-40 / 139.5 |
(-20)-4.0 / 47.4 | |
(0)32.0 / 18.6 | |
(20)68.0 / 8.1 | |
(40)104.0 / 3.9 | |
(60)140.0 / 1.98 | |
(80)176.0 / 1.08 | |
(100)212.0 / 0.63 | |
(120)248.0 / 0.38 | |
(140)284.0 / 0.25 | |
(150)302.0 / 0.16 |
1. Drive pulley speed sensor
2. Turbine speed sensor
3. Oil temperature sensor
4. Pressure sensor connector
Drive Pulley Speed Sensor
• Drive pulley sensor is integrated into the E module.
• The sensor detects the rotation speed of the drive pulley in the Intelligent Variable Transmission (IVT) and transmits it to TCM
Turbine Speed Sensor
• Turbine speed sensor is integrated into the E module.
• Turbine speed sensor detects the speed of the turbine in the IVT and transmits it to TCM.
Oil Temperature Sensor
• Oil temperature sensor is integrated into the E module.
• Oil temperature sensor detects the Intelligent Variable Transmission Fluid (IVTF) temperature and transmits it to TCM.
• Replace the Intelligent Variable Transmission (IVT) assembly as a whole when replacement of inner parts of the IVT is required, Otherwise, dust or foreign substance may get into the IVT during disassembly, which may adversly affect its quality.
1.Replace the IVT assembly.(Refer to Intelligent Variable Transmission (IVT) System - "Intelligent Variable Transmission (IVT)")
Hyundai Accent (HC) (2017 - 2022) Service Manual: Schematic Diagrams
- Schematic Diagrams - Terminal Function Wire NoDesignationCurrent MaxMin 13Ground for recirculation pump39A10A 1Voltage supply for pump motor39A10A 25Voltage supply for solenoid valves15A2A 38Ground for solenoid valves andECU15A2A 22Signal wheel speed sensor (FL)16.8 mA5.9 mA 33Voltage supply for the active wheel speed sensor (RL)16.Hyundai Accent (HC) (2017 - 2022) Service Manual: Floor Console Assembly
- Replacement [Manual consle] • Put on gloves to prevent hand injuries. • When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.