Hyundai Accent (HC): Restraint / Specifications

- Specification

ItemResistance (Ω)
Driver Airbag (DAB) 2.2 - 6.0
Passenger Airbag (PAB) 1.6 - 6.0
Side Airbag (SAB) 1.6 - 6.0
Curtain Airbag1.6 - 6.0
Seat Belt Pretensioner (BPT) 1.6 - 6.0

Tightening Torques
ItemN.mkgf.mlb-ft
Supplemental Restraint System Control Module 8 - 100.8 - 1.0 5.8 - 7.2
Passenger Air Bag 3.9 - 5.9 0.4 - 0.6 2.9 - 4.4
Side Air Bag 5.9 - 7.8 0.6 - 0.8 4.3 - 5.8
Curtain Airbag7.8 - 11.80.8 - 1.25.8 - 8.7
Seat Belt Retractor Pretensioner 39.2 - 53.9 4.0 - 5.5 28.9 - 39.8
Front Impact Sensor 8 - 100.8 - 1.0 5.8 - 7.2
Side Impact Sensor 8 - 100.8 - 1.05.8 - 7.2

Other information:

Hyundai Accent (HC) (2017 - 2022) Service Manual: Rear Drum Brake

- Components 1. Shoe hold down pin 2. Shoe adjuster 3. Upper return spring4. Adjusting lever5. Shoe6. Adjusting spring7. Lower return spring8. Shoe hold spring - Removal 1.Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2.Remove the rear wheel and tire (A).Tightening torque :107.9 - 127.5 N.

Hyundai Accent (HC) (2017 - 2022) Service Manual: Timing Chain Cover

- Removal     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion.     • Mark all wiring and hoses to avoid misconnection. 1.Disconnect the battery negative terminal. 2.Remove the engine cover.(Refer to Engine and Transaxle Assembly - "Engine Cover") 3.

Categories


 
Copyright © 2025
0.0048