Hyundai Accent: Cowl Top Cover / Repair procedures
Hyundai Accent (HC) (2017 - 2022) Service Manual / Body (Interior and Exterior) / Cowl Top Cover / Repair procedures
1.Detach the plug hole (A), loosen the nuts, and then remove the wiper arm (B).
Tightening torque :22.6 - 26.5 N.m (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft)
2.Disconnect the washer nozzle (A).
3.Detach the clips, then remove the cowl top cover (B).
4.To install, reverse the removal procedure.
• Replace any damaged clips (or pin - type retainers).
Other information:
Hyundai Accent (HC) (2017 - 2022) Service Manual: Stop Lamp Switch
- Components 1. Brake pedal member assembly2. Stop lamp switch3. Brake pedal arm 4. Pedal pad - Schematic Diagram - System circuit diagram - Terminal function TerminalDescription 1IGN 2BS 3- 4B+ 5BLS 6GND - Adjustment 1.Turn ignition switch OFF and disconnect the negative (-) battery cable. 2.Remove the lower crash pad. - Components 1. Front muffler2. Center muffler & Rear muffler3. Gasket 4. Hanger - Removal and Installation [Front Muffler] 1.Disconnect the battery negative terminal. 2.Disconnect the oxygen sensor connector (A) and then disconnect from bracket. 3.Remove the front muffler (A).Tightening torque :39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.
Categories
- Manuals Home
- Hyundai Accent Owners Manual
- Hyundai Accent Service Manual
- New on site
- Most important about car
Copyright © 2025 hc.hamanual.com