Hyundai Accent (HC): Heating, Ventilation and Air Conditioning

Hyundai Accent (HC) (2017 - 2022) Service Manual / Heating, Ventilation and Air Conditioning

Contents:

Specifications

- Specification Air Conditioner

item		Specification
Compressor	Type	6VSe12
	Oil type & Capacity	FD46XG (IDEMITSU) 110 ± 10cc (3.72 ± 0.34oz.)
	Displacement	126 cc / rev
	Pulley type	6PK - TYPE
Expansion valve	Type	Block type
Refrigerant	Type	R - 1234yf
	Capacity	480 ± 25 g (16.9 ± 0.88 oz.)

Blower Unit

Item		Specification
Fresh and recirculation	Operating method	Actuator
Blower	Type	Sirocco pan
	Speed step	Auto + 8 speed (Automatic), 7 speed (Manual)
	Speed control	PWM (Automatic, Manual)
Air filter	Type	Particle filter

Heater and Evaporator Unit

Item			Specification
Heater	Type		Fin & Tube type
	Type		Tube - Fin 1Way
	Mode operating method		Cable, Actuator
	Temperature operating method		Cable, Actuator
Evaporator	Temperature control type		Evaporator temperature sensor
	Blower singular		A/C Output OFF Temperature	A/C Output ON Temperature
	Manual control	1 - 3 speed	1.0°C (33.8°F)	2.5°C (36.5°F)
		4 - 5 speed	1.0°C (33.8°F)	2.5°C (36.5°F)
		6 - 7 speed	0.6°C (33.1°F)	2.1°C (35.8°F)
	Full auto control	1 - 4 speed	1.0°C (33.8°F)	2.5°C (36.5°F)
		5 - 6 speed	1.0°C (33.8°F)	2.5°C (36.5°F)
		7 - 8 speed	0.6°C (33.1°F)	2.1°C (35.8°F)

- Tightening Torques

Items	N.m	kgf.m	lb - ft
Compressor	19.6 - 33.3	2.0 - 3.4	14.5 - 24.6
Condenser - Discharge hose	8.8 - 13.7	0.9 - 1.4	6.5 - 10.1
Condenser - Liquid tube	8.8 - 13.7	0.9 - 1.4	6.5 - 10.1
Compressor - Discharge hose	21.6 - 32.4	2.2 - 3.3	15.9 - 23.9
Compressor - Suction hose	21.6 - 32.4	2.2 - 3.3	15.9 - 23.9
Expansion valve - Evaporator	8.8 - 13.7	0.9 - 1.4	6.5 - 10.1

Troubleshooting

- Troubleshooting

Problem Symptoms Table

Before replacing or repairing air conditioning components, first determine if the malfunction is due to the refrigerant charge, air flow or compressor.Use the table below to help you find the cause of the problem. The numbers indicate the priority of the likely cause of the problem. Check each part in order. If necessary, replace these parts.After correcting the malfunction, check the complete system to ensure that performance is satisfactory.Standard:

Symptom	Suspected Area
No blower operation	Blower fuse
	Blower relay
	Blower motor
	Power mosfet
	Blower speed control switch
	Wire harness
No air temperature control	Engine coolant capacity
No air temperature control	Heater control assembly
No compressor operation	Refrigerant capacity
	A/C fuse
	Compressor
	A/C pressure transducer
	A/C switch
	Evaporator temperature sensor
	Wire harness
Vented air not cold	Refrigerant capacity
	Refrigerant pressure
	Drive belt
	Compressor
	A/C pressure transducer
	Evaporator temperature sensor
	A/C switch
	Heater control assembly
	Wire harness
Insufficient cooling	Refrigerant capacity
	Drive belt
	Compressor
	Condenser
	Expansion valve
	Evaporator
	Refrigerant lines
	A/C pressure transducer
	Heater control assembly
No engine idle-up when A/C switch ON	Engine ECM
No engine idle-up when A/C switch ON	Wire harness
No air inlet control	Heater control assembly
No air inlet control	Intake actuator
No mode control	Heater control assembly
No mode control	Mode actuator or cable
No cooling fan operation	Cooling fan fuse
	Fan motor
	Engine ECM
	Wire harness
	Blower resister
	Power mosfet

Special Service Tools

- Special Service Tools

Tool (Number and name)	Illustration	Use
09977-3R000 Disc & hub assembly bolt remover		Removal and installation of disc & hub assembly.

Air Conditioning System ➤

Heater ➤

Blower ➤

Controller ➤

Repair procedures

Air Conditioning System

Other information:

Hyundai Accent (HC) (2017 - 2022) Service Manual: Description and Operation

- Description The SMART KEY system is a system that allows the user to access and operate a vehicle in a very convenient way. To access the vehicle, no traditional key or remote control unit is needed.The user carries a SMART KEY FOB which does not require any conscious actions by the user (e.g. operate a RKE button). The SMART KEY system is triggered by pressing a push button in the door handle.

Hyundai Accent (HC) (2017 - 2022) Service Manual: Engine Control Module (ECM)

- ECM Terminal and Input/Output signal [M/T] ECM Terminal Function (M/T) Connector [A] Pin NoDescription 1- 2- 3Injector (Cylinder #1-1) [Low] control output 4Injector (Cylinder #1-2) [Low] control output 5- 6- 7- 8- 9- 10- 11Electric EGR Control Valve gorund 12Engine Coolant Temperature Sensor (ECTS) #2 ground 13Ignition Coil (Cylinder #1) control output 14- 15Ignition Coil (Cylinder #4) control output 16Thermal Management Module (TMM) Motor ground 17- 18Engine Cool