Ignition Coil
Item | Specification |
Rated Voltage (V) | 13.5 |
Operation Voltage (V) | 6 - 16 |
Item | Specification | |||||
Engine Speed (RPM) | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 |
Dwell Time (ms) | 3.4 | 3.4 | 3.4 | 2.9 | 2.7 | 2.5 |
Secondary Coil Voltage (kV) | 40 ↑ | 40 ↑ | 40 ↑ | 40 ↑ | 40 ↑ | 38 ↑ |
Spark plug
Item | Specification |
Type | SILZKR7E9 |
Gap | 0.8 - 0.9 mm |
(0.0354 - 0.0394 in.) | |
Electrode Material | Nickel Alloy |
Alternator
Item | Specification | |
Rated voltage | 13.5V, 130A | |
Speed in use | 1,000 - 18,000 rpm | |
Voltage regulator | IC Regulator built-in type | |
Regulator Setting Voltage | External mode | 10.6 - 16 ± 0.3V |
Internal mode | 14.5 ± 0.3V | |
Temperature Gradient | External mode | 0 ± 2 mV / °C |
Internal mode | -3.5 ± 2 mV / °C |
Battery
▷ AGM60L-DINItem | Specification |
Capacity [20HR / 5HR] (AH) | 60 / 48 |
Cold Cranking Amperage (A) | 640 (SAE / EN) |
Reserve Capacity (Min) | 100 |
• Model type description
• Cold Cranking Ampere (CCA) : Cold Cranking Amps is a rating used in the battery industry to define a battery's ability to start an engine in cold temperatures.
– The rating is the number of amps a new, fully charged battery can deliver at -18 °C(-0.4 °F) for 30 seconds, while maintaining a voltage of at least 7.2 volts for a 12 volt battery.
– The higher the CCA rating, the greater the starting power of the battery.
• RESERVE CAPACITY (RC) : Reserve Capacity is a battery industry rating, defining a battery's ability to power a vehicle with an inoperative alternator or fan belt.
– The rating is the number of minutes a battery at 26.7°C (80°F) can be discharged at 25 amps and maintain a voltage of 10.5 volts for a 12 volt battery.
– The higher the reserve rating, the longer your vehicle can operate should your alternator or fan belt fail.
Capacity (5 hr / 20 hr) | Length | Width | Height | Total Height |
L (mm) | W (mm) | H (mm) | TH (mm) | |
28/35 | 188 - 192 | 126 - 130 | 198 - 202 | 218 - 222 |
32/40 | 194 - 198 | 133 - 137 | 199 - 203 | 223 - 227 |
36/45 | 203 - 207 | 173 - 177 | 200 - 204 | 221 - 225 |
44/55 | 213 - 217 | 173 - 177 | 198 - 202 | 218 - 222 |
48/60 | 228 - 232 | 173 - 177 | 200 - 204 | 221 - 225 |
54/68 | 258 - 262 | 173 - 177 | 198 - 202 | 220 - 224 |
56/70 | 258 - 262 | 173 - 177 | 198 - 202 | 223 - 227 |
64/80 | 274 - 278 | 170 - 174 | 198 - 202 | 221 - 225 |
70/88 | 349 - 353 | 172 - 176 | 186 - 200 | 183 - 187 |
72/90 | 300 - 304 | 170 - 174 | 200 - 204 | 221 - 225 |
76/95 | 294 - 298 | 172 - 176 | 198 - 202 | 220 - 224 |
80/100 | 326 - 330 | 170 - 174 | 203 - 207 | 225 - 229 |
Capacity (5 hr / 20 hr) | Length | Width | Height | Total Height |
L (mm) | W (mm) | H (mm) | TH (mm) | |
36/45 | 205 - 207 | 173 - 175 | 164 - 168 | 188 - 190 |
48/60 | 240 - 242 | 173 - 175 | 164 - 168 | 188 - 190 |
54/68 | 276 - 278 | 173 - 175 | 164 - 168 | 188 - 190 |
64/80 | 313 - 315 | 173 - 175 | 164 - 168 | 188 - 190 |
72/90 | 351 - 353 | 173 - 175 | 164 - 168 | 188 - 190 |
80/100 | 351 - 353 | 173 - 175 | 164 - 168 | 188 - 190 |
88/110 | 392 - 394 | 173 - 175 | 164 - 168 | 188 - 190 |
Capacity (5hr / 20 hr) | Length | Width | Height | Total Height |
L (mm) | W (mm) | H (mm) | TH (mm) | |
40/50 | 205 - 207 | 173 - 175 | 164 - 168 | 188 - 190 |
48/60 | 227 - 229 | 173 - 175 | 164 - 168 | 188 - 190 |
56/70 | 276 - 278 | 173 - 175 | 164 - 168 | 188 - 190 |
64/80 | 312 - 314 | 173 - 175 | 164 - 168 | 188 - 190 |
72/90 | 351 - 353 | 173 - 175 | 164 - 168 | 188 - 190 |
84/105 | 392 - 394 | 173 - 175 | 164 - 168 | 188 - 190 |
Starter
Item | Specification | |
Rated voltage | 12V, 0.9 kW | |
The number of pinion teeth | 10 | |
Performance [No-load, 11.5V] | Ampere | 83.6 A |
Speed | 3,500 rpm |
Item | N.m | kgf.m | lb-ft |
Ignition coil mounting bolt | 9.8 - 11.8 | 1.0 - 1.2 | 7.2 - 8.7 |
Spark plug | 14.7 - 24.5 | 1.5 - 2.5 | 10.9 - 18.1 |
Condenser & Hanger bracket mounting bolt | 18.6 - 23.5 | 1.9 - 2.6 | 13.7 - 17.4 |
Alternator mounting upper bolt | 23.5 - 26.5 | 2.4 - 2.7 | 17.4 - 19.5 |
Alternator mounting lower bolt | 29.4 - 41.2 | 3.0 - 4.2 | 21.7 - 30.4 |
Alternator brace mounting bolt | 19.6 - 26.4 | 2.0 - 2.7 | 14.5 - 19.5 |
Battery (+) terminal tightening nut | 8.0 - 10.0 | 0.8 - 1.0 | 5.9 - 7.4 |
Battery (-) terminal tightening nut | 8.0 - 10.0 | 0.8 - 1.0 | 5.9 - 7.4 |
Battery mounting bracket bolt | 9.0 - 14.0 | 0.9 - 1.4 | 6.6 - 10.3 |
Battery sensor cable mounting bolt | 27.0 - 33.0 | 2.7 - 3.3 | 19.9 - 24.3 |
Starter mounting bolt | 49.0 - 63.7 | 5.0 - 6.5 | 36.2 - 47.0 |
Hyundai Accent (HC) (2017 - 2022) Service Manual: Timing Chain
- Removal 1.Disconnect the battery negative terminal. 2.Turn the crankshaft damper pulley clockwise, and align its groove with the timing mark of the timing chain cover. 3.Remove the timing chain cover.(Refer to Timing System - "Timing Chain Cover") 4.Remove the cam to cam guide (A). 5.Remove the timing chain tensioner (A) and remove the timing chain tensioner arm (B).Hyundai Accent (HC) (2017 - 2022) Service Manual: Driver Airbag (DAB) Module and Clock Spring
- Description • Driver Air Bag (DAB)DAB is installed in the steering wheel, and electrically connected to the SRSCM via clock spring. It is deployed during frontal impact to protect the driver. • Clock SpringClock spring delivers actuation signal, generated by the sensors installed in the front and right/left sides of a vehicle, to the inflator (gas generator) of the driver air bag module via internal cable.