Contents:
The Electric Power Steering (EPS) system assists you with steering the Hyundai Accent for smoother, lighter steering feel. If the vehicle is turned off or if the power steering system becomes inoperative, you may still steer the vehicle, but it will require increased steering effort—especially at low speeds.
If you notice any unusual change in the effort required to steer during normal vehicle operation, or if steering assist feels inconsistent, have the system checked by an authorized HYUNDAI dealer as soon as practical.
CAUTION
If the Electric Power Steering System does not operate normally, the warning light (
) will illuminate on the instrument cluster. You may steer the vehicle, but it will require increased steering effort. Take your Hyundai Accent to an authorized HYUNDAI dealer and have the system checked as soon as possible.
Information
The following symptoms may occur during normal vehicle operation:
Adjust the steering wheel so it points toward your chest, not toward your face. Make sure you can clearly see the instrument cluster warning lights and gauges. After adjusting, push the steering wheel both up and down and in and out (if equipped) to be certain it is locked in position. Always adjust the steering wheel position before driving your Hyundai Accent.
WARNING
NEVER adjust the steering wheel while driving. This may cause loss of vehicle control resulting in an accident.

To change the steering wheel angle and height:
1. Pull down the lock-release lever (1).
2. Adjust the steering wheel to the desired angle (2) and distance forward/back (3).
3. Pull up the lock-release lever to lock the steering wheel in place.
Information
After adjustment, sometimes the lock-release lever may not lock the steering wheel. This is not a malfunction. It can occur when two gears are not engaged correctly. In this case, adjust the steering wheel again and then lock the steering wheel.
CAUTION
While adjusting the steering wheel height, do not push or pull it forcefully, since the fixture can be damaged.

When the ignition switch is in the ON position or when the engine is running, press the heated steering wheel button to warm the steering wheel. The indicator on the button will illuminate. This feature can be especially helpful for cold-weather driving in the Hyundai Accent.
To turn the heated steering wheel off, press the button again. The indicator on the button will turn off.
Information
The heated steering wheel will turn off automatically approximately 30 minutes after it is turned on.
If the engine is turned off while the heated steering wheel is on, the timer function is reset. To use the heated steering wheel again, press the button after restarting the vehicle.
NOTICE
Do not install any cover or accessory on the steering wheel. A cover or accessory could cause damage to the heated steering wheel system or reduce heating performance.

To sound the horn, press the area indicated by the horn symbol on the steering wheel (see illustration). The horn will operate only when this area is pressed, helping you alert other road users when necessary.
NOTICE
Do not strike the horn severely to operate it, or hit it with your fist. Do not press on the horn with a sharp-pointed object, as this may damage the steering wheel pad or horn switch components.
Hyundai Accent (HC) (2017 - 2022) Owner's Manual: Cylinder Head
- Removal • Use Fender cover to avoid damaging painted surfaces. • To avoid damaging the cylinder head, wait until the engine coolant temperature drops below normal temperature before removing it. • When handling a metal gasket, take care not to fold the gasket or damage the contact surface of the gasket. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion.Hyundai Accent (HC) (2017 - 2022) Owner's Manual: Description and Operation
- Description Burglar Alarm State [B/A State] B/A StateDescription DISARM1) In "DISARM" state, no vehicle start inhibition. So, when door, hood, or Tailgate is opened, there is no alarm sound and flashing. 2) If the battery is disconnected while the state is not "ARM/ARMWAIT/ALARM/REARM", B/A state is set to "DISARM" state. 3)In "DISARM" state, security indicator keeps blinking.